Increasing internet speed

Def :  By now all of you may be familiar with the internet and its available facilities.

The Internet is a global system of interconnected computer networks that use the standard Internet Protocol Suite (TCP/IP) to serve billions of users worldwide. It is a network of networks information resources and services, such as the inter-linked hypertext documents of the world wide web (WWW) and the infrastructure to support electronic mail. that consists of millions of private, public, academic, business, and government networks, of local to global scope, that are linked by a broad array of electronic and optical networking technologies. The Internet carries a vast range of

But how about boosting your internet speed

First of all you need to know your actual internet speed, both during uploading and downloading
The following site http://www.speakeasy.net/speedtest/ allows you to confirm you internet speed

How to boost and increase your Internet speed

Need to increase your Internet connection speed/ There are a number of tweaks out there that will enable you to maximize your system’s performance and likewise, there are lots of things you can do to tweak your Internet connection to boost Internet speed. There are tons of them out there, but this article just lays out two of the most useful ones.

Tweak 1: Un-reserving bandwidth

By Default, XP reserves 20% of your bandwidth for it’s own use. This is a crying shame and should be undone immediately. To do this, you will not require any additional software, just follow the steps below.

1. Access the Group Policy Editor. This can be done by typing gpedit.msc in the Run box (Start, and then Run). You will now be looking at something like this.
   
2. Navigate to Computer Configuration/Administrative Templates/Network/QOS Packet Scheduler using the pane on the left side.
3. In the left pane, there should be a Setting with the name Limit reservable bandwidth, right-click this and select properties.
4. Now this might seem a bit weird, as the State will say “Not Configured” but Windows by default will reserve 20%. So the trick is to set it to reserve 0%. You can do this by clicking enabled and then setting the Bandwidth Limit % to 0. It should look like the image below.
   
5. Hit OK then close the Group Policy Editor.

That’s it! You’re done with the first tweak. Just a quick side note here, there are lots of other little things you can change easily using the policy editor. Feel free to wander around!

Tweak 2: Optimizing TCP/IP settings

This next tweak is going to require a piece of freeware called SG TCP Optimizer. This nifty little utility will optimize the manner in which your PC sends and receives data packets, which will as a result speed up your connection. Though It is most effective for broadband connections, it works for just about any type of connection.

1.  Download SG TCP Optimizer. You don’t need to install it, just double-click and it will run. Once you run it, you should be looking at this :
   
2. That is quite an intimidating interface, but we won’t be touching most of it. Under the General Settings tab, just drag the slider to match your connection’s download speed. Then, at the bottom of the same window, select the “Optimal Settings” radio button and click “Apply Changes”.
3. You will now be looking at a window like the one below.
   
4. Make sure that the “Backup” tick box is ticked and then click OK.
5. All that’s left is to reboot your system, in order to apply the changes. You will be prompted to do so.
6. Once your system has rebooted, surf around for a while. If for whatever reason you feel your connection has been affected negatively, then fear not, for the changes you made can be undone. Start SG TCP Optimizer, click File and choose restore backed up settings. This will bring up a dialog box where you can navigate to where you downloaded the program. There, you will find a file with the extension .spg with a filename containing the date.
   For example If you applied the changes on the 21st of February “sg_backup_2008-02-21-xxxx.spg” would be the filename, where the xxxx is any number. Once you find this file select it and press open. This should bring to a dialog box similar to the one shown above. Click OK and reboot. Your original settings are now restored.

There you have it. Your connection is now tweaked and ready to go! Any questions, post a comment!

Tweak 3 : Using a download manager

Using a download manager can increase your download speed to quite an extent. The best download manager I've known is Internet download manager and it's quite a user friendly software.For most sites if contents are being downloaded from Mauritius the minimum download speed should be around the 50-60 KB/Sec

However some sites like You-tube,Microsoft,Nero and even google can give up to a maximum speed of 300-315  KB/Sec.

With the new packages that MY.T is offering the speed can be twice as much as those above.

Posted in: Internet