THIS IS THE TABLE OF CONTENTS

Click on the picture to access the table of contents.

This is default featured post 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured post 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured post 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured post 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Monday, December 27, 2010

HowTo: Bypass Megavideo Time Limit

Are you annoyed and frustrated with Megavideo’s time limit? Don’t worry, I’ll show you how you can bypass that limit and let you enjoy watching your video or movie without any interruptions. Megavideo is one of the best and one of the most popular video sharing sites in the Internet. The problem about watching movies on Megavideo is that there is a 72-minute time limit and once you hit the limit, the video stops and you get this message:
Megavideo Time Limit
Some movies are more than 72 minutes long, some are even 2-3 hours long so once you hit the time limit, you can’t continue watching the movie anymore. Sucks doesn’t it? Today, I’m gonna share with you a few methods on how to bypass the Megavideo time limit.
DISCLAIMER: These are workarounds suggested by other users. I do not endorse them and I haven’t tried all of the methods listed below. PERFORM THE METHODS AT YOUR OWN RISK.


Method 1 – Work Offline
Firefox Work Offline
1. Open the video that you want to watch on Megavideo. Click the Play button and when it starts playing, click on the Pause button to let it buffer.
2. Wait until the video is done loading/buffering to 100%.
3. Click on Work Offline and watch the video.
Mozilla Firefox
- Click on File > Work Offline.
Internet Explorer 7 & 8
- Click on Tools > Work Offline.
[Remember to unclick the Work Offline button once you're done watching]


Method 2 – Block Cookies
1. Clear your web browser’s cache and delete cookies.
2. Block cookies.
Mozilla Firefox
- Click on Tools > Page Info.
- Click on the Permissions tab. Under Set Cookies, if Use Default is checked, uncheck it then select Block.
Internet Explorer 7 & 8
- Click on Tools > Internet Options.
- Click on the Privacy tab.
- Click on Sites.
- Under “Address of Website“, type “megavideo.com” (without the quotes), click Block.
- Repeat the previous step and this time type “www.megavideo.com“, click Block.
3. Disconnect your modem and wait for about 10 seconds before reconnecting it.
4. Continue watching the video.


Method 3 – Download
(You’ll need Mozilla Firefox for this one.)
Download Helper
1. Install the DownloadHelper addon and restart Firefox.
2. Go to Megavideo and open the video that you want to watch and click Play.
3. Once the video starts buffering, the DownloadHelper icon would start revolving. Click on the small arrow beside it then click on the .flv file and it will prompt you to save the file to your computer. You can rename the file if you want and choose where you want it to be saved.
4. Watch the video with VLC Media Player or Applian FLV player.


Method 4 – Illimitux addon
(You’ll need Mozilla Firefox for this one.)
1. Install the Illimitux addon and restart Firefox.
2. Go to Megavideo and open the video that you want to watch.
3. Click on the Illimitux icon (lower right corner of Firefox) and you will be directed to another page where you can watch the video without any time limits.
Caution: This add-on has not been reviewed by Mozilla. Be careful when installing third-party software that might harm your computer.


Method 5 – Megastreaming.org
1. Go to Megavideo and copy the URL of the video that you want to watch. (example: http://www.megavideo.com/?v=Q7UK1BVI)
2. Open http://megastreaming.org/.
3. Paste the URL of the video you want to watch on the space provided and click Play.


Method 6 – Lyke.co.cc
1. Go to Megavideo and copy the URL of the video that you want to watch. (example: http://www.megavideo.com/?v=Q7UK1BVI)
2. Open http://lyke.co.cc/.
3. Paste the URL of the video you want to watch on the space below “Remove Time Limit” and click Watch.


Method 7 – No More 72 Mins
1. Go to Megavideo and copy the URL of the video that you want to watch. (example: http://www.megavideo.com/?v=Q7UK1BVI)
2. Open http://megavideonotimelimit.com/.
3. Paste the URL of the video you want to watch on the space provided and click Watch The Video.
UPDATE: Proven and effective method to bypass the Megavideo time limit.


Method 8 – Cacaoweb
Cacaoweb is a free and opensource software that handles live streaming multimedia content and can automatically remove the Megavideo 72 minute time limit, including the advertisements.
Firefox Users:
1. Install the Cacaoweb Firefox addon.
2. Restart Firefox once the addon is finished installing.
3. Open the video that you want to watch on Megavideo and Cacaoweb will automatically detect it.
Non-Firefox Users:
1. Go to the Cacaoweb website and click on the Download Cacaoweb Now button.
Cacaoweb Download
2. It will bring you to a SourceForge.net page, click on View All Files.
Cacaoweb Download
3. Choose the specific installer for your computer’s OS. (MAC, Windows, Linux, BSD)
Cacaoweb Download
4. Install Cacaoweb.
Thanks to the commenters who suggested Cacaoweb!
Just choose any of the methods listed above which you think suits you best, follow the instructions and you’ll be able to enjoy watching videos and movies on Megavideo without any time limits or restrictions.
If you know of any other way or alternatives on how to bypass the Megavideo time limit, please share it with us so we can include it on this list.


Method 9 –Change Ip Address
You can change your Ip address each time you have exceeded the 72 minutes time limit in order to bypass the time limit.Just download Platinum Hide Ip and cahnge your Ip address.

Saturday, December 25, 2010

How to convert 2D into 3D

Here's an option that's easy and cheap.  Very exciting, I'll explain it.

Step #1: Go to the TriDef website.
http://www.tridef.com/

Step #2: Buy the TriDef 3d experience.
It'll cost you $50.00.

Step #3: Find or buy some red-blue anaglyph 3d glasses.

Step #4: Take your video, any video, and play it in anaglyph format with Tridef.
Ta-da!  Your video is now in 3d!

TriDef is one of those conversion systems that analyzes the areas of your video and determines what is in front of what, then uses that data to create two tracks and then convert them into one anaglyph video.  All in real time.  Which is pretty damn impressive, although it's not as good quality as if the video had actually been shot in 3d.
Plus anaglyph format sucks.  So here's a procedure for going from TriDef's 2d -> 3d conversion to a nicer format, ColorCode.
ColorCode, incidentally, is the format used in the 2009 Superbowl.  It's a good format in that it looks almost like normal video without glasses, but with the ColorCode glasses, it looks 3d - and with no loss of the color spectrum!

So here's phase 2 of my 3d conversion method:

Step #1: Download the ColorCode 3d software if you want ColorCode 3d instead of crummy red-blue anaglyph.
http://web.mac.com/csvendb/APO/Software.html

Step #2: Get some free ColorCode glasses if you didn't do so at your local grocery store before the aforementioned Superbowl.  The ColorCode website will send you a few free by mail if you fill out a form.

Step #3: Take your video and display it in TriDef in the parallel screen mode or whatever it's called, the one where you get two video tracks out of the one you started with, side by side.

Step #4: Use FRAPS or some other screen video recorder app (pick your fave) to record your screen as the video is playing.  Make sure you capture both the left and right video streams.

Step #5: Go into a video editor and crop the two tracks carefully down to the right size.

Step #6: Run them through the ColorCode software or any app that converts two tracks into one 3d track (in any format you prefer)
And then you can enjoy your awesome video in ColorCode 3d or any other 3d format you choose.
Alternatively, you can do all of this in one step, by handing your 2d video to me, and paying me a few dollars, and asking me to convert it to ColorCode for you.  Just a thought.  ;)
For better quality 3d than Tridef can generate artificially, you can use some kind of camcorder addon for video that is live-action:
http://www.stereo3d.com/vidrec.htm
And render two separate passes in your 3d app of choice for CG effects shots, from two slightly offset virtual cameras.
For compositing shots, you can either composite each shot twice, one for each eye, or run it through the Tridef method.  The latter is not ideal, but it'll seem pretty tempting when the alternative is hours of extra rotoscoping and motion tracking.
Anyway, just thought you might like to know.


 Alternate Method

The 2D to 3D Realtime Video Conversion Script for Avisynth v0.3 was designed to be used for realtime conversion, but it can as well be used to get a permanent video converted from 2D to 3D. Sometimes you might just want to have a separate video already converted or your PC might for example not being able to handle 1080p content in real time. An example for converted video is the 1080p Avatar Trailer that you can download from the links below, the video file was just converted with the script so you can see what it is capable of. Just don’t forget that here I’m talking about automated 2D to 3D conversion which can usually provide good results, but they are not as good as what you’ll get from a video shot in Stereoscopic 3D mode. In order to convert videos to 3D with a file output, besides the AivSynth script you’ll also need to download the free video editor VirtualDub along with some codecs that are needed to handle the video and audio output. A good example for that would be Xvid for video and LAME MP3 for audio, but others might as well do… just have in mind that I’m talking about encoding here and not just about being able to decode these formats.

virtuadub-xvid-video-compression

You need to open VirtualDub and then Open as a video file the 2D to 3D AVS script instead of directly opening the video file you’ll be converting, don’t worry, the AviSynt script will do what is needed and will just pass video that VirtualDub can interpret. Then Open the Video meny, make sure that Full Processing mode is selected (on by default) and Open up the Compression menu, where you’ll see a list of compatible codecs installed on your PC. You can choose Xvid MPEG4 Codec and Configure it to use Single pass quality based encoding with a Quantizer of 4 in order to have a good ratio between compression size and image quality.


virtuadub-mp3-audio-compression

Recompressing the audio is optional, but you’d need to do it as otherwise the file has PCM audio that just makes the size of the file too big. In this case you need to open the Audio menu, select the Full Processing Mode (here it is not on by default) and choose the Compression option. Again you’ll see a list of installed and supported audio codecs, here MP3 is just fine for Stereo output and you can choose 128Kbps for good enough quality and small file size.
What you need to do now is just save the output file as Avi and the recompression of the video will begin, the time it can take varies depending on a lot of factors for example if you are using a single or multi-core CPU, what it the size and length of the video etc. Here you just need to wait a bit for the processing to finish and after that you’ll be ready to play your converted video file directly in the stereoscopic player without the need to go trough the AviSynth script for realtime conversion. So now back to the Full HD 1080p teaser as an example that I’ve converted using my conversion script and VirtualDub, the file is about 170MB…

Wednesday, December 22, 2010

Viewing in 3D

First of all you will need a software that is able to convert any normal DVD into 3D even if the DVD was not originally in 3D. Cyberlink power DVD 10 is able to do this.

The link below is the direct link to download the player at a broadband speed.Don't worry it's a trial version and you can later crack it and make it a full version without paying.

To get the crack click on the ads by Google and wait some time.Then send me a mail on Samimvez@hotmail.com asking fro the crack.I will then send you the crack by mail.

Link: http://download.cyberlink.com/ftpdload/trial/pdvd/10/CyberLink.1516(Trial)_DVD100209-06.exe


Insert your DVD in your drive wait until the program launch the DVD.You can then choose to play the movie in 3D

NOTE : 3D glasses will be needed.

Support us by clicking on the ads.

Tuesday, December 21, 2010

Watch Online Free Bollywood movies and serials

Follow the link http://www.rajshri.com

Wanna download form http://www.rajshri.com,follow the steps


Thursday, December 16, 2010

Downloading of streaming videos

Downloading of streaming videos

-----Video downloading can be very simple on some sites while on others it may be quite an uphill task.On you tube you can just use real down loader form Real Player IDM can be used.Almost every streaming video can be downloaded in this way.

               

Downloadingof movies

Movies can be downloaded or viewed online.Many file hosters such as Rapidshare ,Fileserve ,Megaupload, Netload and many others save various movies.To download these movies from the file hosters' site only the downlpad link is needed.

Links for ENGLISH movies can be found at warez-bb.com

Links for FRENCH movies can be found at www.wawacity.eu.

Find the movie you need ,get the limk and start downlaoding.

However looking for the link is not actually a problem but the real problem is that file hosters want users to register on their site which of course you have to pay.Free user is a way to download on the site but the speed and the limit of downloading is limited.

How to override limit provided by file hosters

RAPIDSHARE :
For rapidshare you can just use some of the leechers available.Firats of all what is a leecher.A leecher will download the file you want on their server and you can in turn download the file form their server without any limit and at maximum speed.

Rapidshare leechers

http://www.leechrs.com/
http://www.megaleech.eu/
http://www.gigaleecher.com/index.php
http://www.leechlord.com/index.php
http://rs-mu-hf-leech.co.cc/index.php
http://rapidrar.com/generate
http://www.leechking.com/
http://leech.aywasoft.com/
Just copy the link provided above on your address bar and start downloading.

Normally a space will be provided on the lecheer's site to put your link.

Megaupload leechers 

Megaupload according to me is the best movie download site as it allows a maximum of 999 MB downloading as free member.


Leechers are from the best to the worst


Mega-debrid.com
http://www.gigaleecher.com/index.php
http://rs-mu-hf-leech.co.cc/index.php

Leechers for other file hosters will be posted later

Increasing internet speed

Def :  By now all of you may be familiar with the internet and its available facilities.
The Internet is a global system of interconnected computer networks that use the standard Internet Protocol Suite (TCP/IP) to serve billions of users worldwide. It is a network of networks information resources and services, such as the inter-linked hypertext documents of the world wide web (WWW) and the infrastructure to support electronic mail. that consists of millions of private, public, academic, business, and government networks, of local to global scope, that are linked by a broad array of electronic and optical networking technologies. The Internet carries a vast range of
But how about boosting your internet speed

First of all you need to know your actual internet speed, both during uploading and downloading
The following site http://www.speakeasy.net/speedtest/ allows you to confirm you internet speed

How to boost and increase your Internet speed

Need to increase your Internet connection speed/ There are a number of tweaks out there that will enable you to maximize your system’s performance and likewise, there are lots of things you can do to tweak your Internet connection to boost Internet speed. There are tons of them out there, but this article just lays out two of the most useful ones.
Tweak 1: Un-reserving bandwidth
By Default, XP reserves 20% of your bandwidth for it’s own use. This is a crying shame and should be undone immediately. To do this, you will not require any additional software, just follow the steps below.
  1. Access the Group Policy Editor. This can be done by typing gpedit.msc in the Run box (Start, and then Run). You will now be looking at something like this.
    image
  2. Navigate to Computer Configuration/Administrative Templates/Network/QOS Packet Scheduler using the pane on the left side.
  3. In the left pane, there should be a Setting with the name Limit reservable bandwidth, right-click this and select properties.
  4. Now this might seem a bit weird, as the State will say “Not Configured” but Windows by default will reserve 20%. So the trick is to set it to reserve 0%. You can do this by clicking enabled and then setting the Bandwidth Limit % to 0. It should look like the image below.
    image
  5. Hit OK then close the Group Policy Editor.
That’s it! You’re done with the first tweak. Just a quick side note here, there are lots of other little things you can change easily using the policy editor. Feel free to wander around!
Tweak 2: Optimizing TCP/IP settings
This next tweak is going to require a piece of freeware called SG TCP Optimizer. This nifty little utility will optimize the manner in which your PC sends and receives data packets, which will as a result speed up your connection. Though It is most effective for broadband connections, it works for just about any type of connection.
  1.  Download SG TCP Optimizer. You don’t need to install it, just double-click and it will run. Once you run it, you should be looking at this :
    image
  2. That is quite an intimidating interface, but we won’t be touching most of it. Under the General Settings tab, just drag the slider to match your connection’s download speed. Then, at the bottom of the same window, select the “Optimal Settings” radio button and click “Apply Changes”.
  3. You will now be looking at a window like the one below.
    image
  4. Make sure that the “Backup” tick box is ticked and then click OK.
  5. All that’s left is to reboot your system, in order to apply the changes. You will be prompted to do so.
  6. Once your system has rebooted, surf around for a while. If for whatever reason you feel your connection has been affected negatively, then fear not, for the changes you made can be undone. Start SG TCP Optimizer, click File and choose restore backed up settings. This will bring up a dialog box where you can navigate to where you downloaded the program. There, you will find a file with the extension .spg with a filename containing the date.
    For example If you applied the changes on the 21st of February “sg_backup_2008-02-21-xxxx.spg” would be the filename, where the xxxx is any number. Once you find this file select it and press open. This should bring to a dialog box similar to the one shown above. Click OK and reboot. Your original settings are now restored.
There you have it. Your connection is now tweaked and ready to go! Any questions, post a comment!



Tweak 3 : Using a download manager

Using a download manager can increase your download speed to quite an extent. The best download manager I've known is Internet download manager and it's quite a user friendly software.For most sites if contents are being downloaded from Mauritius the minimum download speed should be around the 50-60 KB/Sec

However some sites like You-tube,Microsoft,Nero and even google can give up to a maximum speed of 300-315  KB/Sec.

With the new packages that MY.T is offering the speed can be twice as much as those above.

Twitter Delicious Facebook Digg Stumbleupon Favorites More